EX90  

NOMINAL TORQUE*     106,000 ft-lb (144 kNm)

ACTUAL TORQUE*          88,000 ft-lb (119 kNm)

LINEPULL                             30000 lb    (132 kN)

DEPTH**                                      94 ft      (28.7m)

WEIGHT**                       110000 lb  (49940 kg)


The EX90 is a new generation of ExcaDrill that delivers the full power of a 30-45 ton excavator to the tool increasing drilling capacity and performance while keeping the hydraulics simple. A single layer grooved drum, controlled freefall winch sets the EX90 above the competition for fast, hassle-free drilling.    *varies depending on excavator mount


Click here for ADSC article on new Excadrill EX line.


Click here for more details (Printable PDF)


For further inquiries please call 800-927-8486

email sales@watsonusa.com

or submit web inquiry below.

* Nominal Torque (aka Rated Torque) is published by all manufacturers but is actually a theoretical calculation that ignores the 15% - 20% efficiency loss present in all rigs.

* Actual Torque is the usable torque at the tool determined through testing of every Watson rig. This value is not typically shared by manufacturers.



**Varies depending on excavator mount and bars

EX90 DEFINING ADVANTAGES


  • DUAL DRIVE HYDRAULIC ROTARY SYSTEM

    Dual Drive Rotary enables shiftless operation from 90,000 ft-lbs to 100 rpm spinoff. Without clutches, gear changes or sensors, simplicity, and thus reliability is achieved.

  • FULL EXCAVATOR POWER

    Hydraulics are designed to harness the full horsepower of the excavator and deliver to both the tool and the winch for maximum production.

  • OPTIMAL OUTPUT

    Variable controls for torque / speed / crowd can be dialed in to match conditions.

  • LARGER DIAMETER ROTARY = bigger bars

    The larger the rotary, the bigger the Kelly bars, the bigger the bearings, the less wear and tear. Larger diameter also means more kelly bars for greater depth without trading off kelly tube thickness and drive lug area.

  • TOOL REACH

    Boom mounted design brings versatility unmatched by mobile mounted rigs. Tool reach of more than 10 ft from the tracks can be achieved on the proper excavator.

  • REDUCED WEIGHT AND SMALLER EXCAVATOR CLASSES

    Unique trunnion & rotary design transfers drilling loads directly from the rotary to the mast thereby reducing weight and stress on the mast. This weight savings allows the machine to be mounted on smaller excavator classes than previous generations of Excadrills.

  • FULL LENGTH TOP CROWD

    Full length top applied crowd force drills straighter holes and simplifies Kelly locking.

  • SINGLE LAYER, GROOVED KELLY WINCH DRUM

    The Kelly winch is fitted with a large 24" diameter grooved winch drum big enough to keep all of the wire rope on one layer and a rear roller. With this combination, speed and consistent linepull are achieved along with excellent rope management and long rope life.

  • PROPRIETARY CONTROLLED FREEFALL KELLY WINCH

    Watson's proprietary controlled freefall winch achieves the performance of prior freefall systems with even greater control over the tool while rapidly descending down the hole. Coupled with a 2-SPEED raise function and the EX has unbeatable cycle times.

  • INTERCHANGEABLE SQUARE FRICTION OR ROUND LOCKING KELLY BARS

    Heavy duty Kelly bars made from high strength alloy steel are standard on Watson rigs. The EX has interchangeable inserts to allow swap out for either square friction or round locking to suit your drilling needs for any given job.  

  • OPTIMIZED AND ISOLATED HYDRAULIC INTERFACE

    Integration to the excavator has been carefully managed to limit the overlap of the systems by providing dedicated valve for the drill. By cleanly separating the two systems, diagnostics, servicing and maintenance of the drill can be distinct from the excavator.

  • CUSTOMIZATION TO FIT CUSTOMER APPLICATION

    WATSON is a custom manufacturer that welcomes the opportunity to customize rigs. EX rigs can be mounted to numerous makes and models of excavators and further modified to fit specific applications requirements like railcar mount, 10' mast heights, zero turn, etc.

  • PATENTED PENDING ROUND LOCKING BARS

    Watson has always built the heaviest duty round locking kellys in the business. The latest generation incorporates patented features designed to eliminate the hassle of finding locks while vastly extending the time between servicing. With 4x the torque surface and 12x the crowd surface, customers are able to go years between refurbishing bars. Additionally, open bottom design allows easy drainage for slurry drilling. Call for details.

Typical applications

The EX90 Excavator attachment offers the mobility and reach of an excavator combined with the reliability, power and speed of a Watson Drill rig, making it useful in a wide range of applications.

  • Civil Roadways
  • Caissons
  • Transmission lines
  • Elevator shafts
  • Commercial
  • Rock drilling
  • Roadway Signs, guardrails
  • Electrical distribution

SUBMIT INQUIRY

Fill out the Inquiry Form below








Territory   

Sector       

Rig Model?   


Inquiry Comments: