2200  

NOMINAL TORQUE*   75,000 ft- lb     (102 kNm)

ACTUAL TORQUE*       63,000 ft-lb       (85 kNm)

LINEPULL                         25,000 lb        (111 kN)

DEPTH**                                    75 ft           (23 m)

WEIGHT**                        63,500 lb          (29 mt)


The Model 2200 is a mid-size truck mounted drill unit that is fast, easy to operate and highly productive. This drill model is designed for mounting on an 4 axle truck configuration, typically 8x6 or 6x4 with a lift axle.


Click here for more details (Printable PDF)


For further inquiries please call

800-927-8486

email sales@watsonusa.com

or submit web inquiry below.


* Nominal Torque (aka Rated Torque) is published by all manufacturers but is actually a theoretical calculation that ignores the 15% - 20% efficiency loss present in all rigs.

* Actual Torque is the usable torque at the tool determined through testing of every Watson rig. This value is not typically shared by manufacturers.


**Varies depending on excavator mount and bars

2200 key advantages


  • CONTROLLED FREEFALL KELLY WINCH - REAR MOUNTED

    Controlled freefall is a critical part of productive drilling. The 2200's controlled freefall rate of speed is dynamically adjustable to meet the needs of the operator and demands of the auger and bar arrangement. Combined with 2-speed raise, unparalleled cycle times are achieved.

  • SINGLE LAYER GROOVED WINCH DRUM

    Custom grooved drum winch big enough to keep all of wire rope on one layer.  Speed and consistent pull are achieved along with unparalleled rope management and excellent rig balance. 

  • TOP APPLIED KELLY CROWD SYSTEM

    Watson's top crowd system applies the downward force to the top of the kelly rather than through a wet kelly or bar locking system.  The wear and tear on the rotary from crowd forces is eliminated while also allowing the operator to drill straighter holes.

  • NON-PERMIT LOAD ON 8x6 or 6x4 with pusher

    Depending on configuration, mobility hassles can be virtually eliminated.

  • Tri-Drive Rotary

    hydraulic tri-drive rotary

    Fast and responsive triple drive rotary produces more than 63,000 ft-lbs actual torque and spinoff speeds of 100+ rpm.

  • tool clearance

    8' (2.4m) diameter tool clearance around the outriggers with 10' (3m) ground clearance under the rotary.

  • INTERCHANGEABLE SQUARE FRICTION OR ROUND LOCKING KELLY BARS

    Heavy duty Kelly bars made from high strength alloy steel are standard on Watson rigs. The 2200 has interchangeable inserts to allow swap out for either square friction or round locking to suit your drilling needs for any given job.  

  • PATENTED ROUND LOCKING BARS

    Watson has always built the heaviest duty round locking kellys in the business. The latest generation incorporates patented features designed to eliminate the hassle of finding locks while vastly extending the time between servicing. With 4x the torque surface and 12x the crowd surface, customers are able to go years between refurbishing bars. Additionally, open bottom design allows easy drainage for slurry drilling. Call for details.

typical applications

The 2200TM provides the versatility needed for a wide range of applications from Utility Distribution, to commercial applications.  The popular truck mounted version eliminates mobilization headaches making the 2200 a productive profitable rig for large and small jobs.

  • Electrical distribution
  • Light Commercial
  • Residential
  • Roadway Signs, guardrails
  • Transmission lines
  • Elevator shafts
  • Civil Roadways
  • Oil Field

Fill out the Inquiry Form below








Territory   

Sector       

Rig Model?   


Inquiry Comments: